1-Channel 5V Relay Module | IoT Arduino Raspberry pi
Rp5,300
Alasan berbelanja di Saudagar Shop
- Pesanan sebelum jam 2 siang akan diproses dihari yang sama
- Garansi uang kembali
- Bisa COD - Bayar setelah barang sampai
Description
Description
| Weight | 350 g |
|---|---|
| SKU | 8b30f2d67f4e |
| Category | Komponen Electronic |
Features:
1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.
Specification:
1. VCC: Power interface 5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
5. Trigger Mode: Low Level Trigger (0 – 1.5V)
6. Size: approx. 41 x 16 x 16mm
*Suitable for IoT, Arduino, Raspberry pi, NodeMCU / Embedded System Project or Robotic Application
*Cocok untuk IoT, Arduino, Raspberry pi, NodeMCU / Embedded System Project atau Robotic Application
**Note: Mohon ditanya terlebih dahulu untuk ketersediaan stock
You also like
